The DeltaD Build
This is the first ever airplane that I have completely designed by myself. I have no Idea if it’s going to fly, but I hope so. It is designed around the power setup from the old AitT flying wing and will have the KFM4 airfoil. I have only used stuff that I had lying around at home already, so this is a budget project.Wingspan: 50 cm
Length: 50 cm
All up weight: 312 g
Power setup:
Motor: Fiago 20*40 ~3223kv
ESC: 25A HiModel ESC
Battery: 2s 1000mAh Li-po
Servos: Multiplex 9g servos
Prop: 4,75*4,75 Prop
Two 6mm Depron base cut out.
Glued the two halves together.
3mm KF airfoil number 4 step cut out.
Glued on.
Motor mount and bottom KF step glued.
Fuselage done and dry fitted.
Middle vertical stabilizer glued on.
Winglets glued.
Elevons.
Fuselage glued on.
A simple hatch.
Servos, pushrods and control horns in place.
I think it looks pretty good.
I just have mount the motor and it’s done.
Here is the maiden flight:
0 Comments