Disaster! I’ve lost the GoPro Hero HD camera and I can’t find it!
It was during the first FPV flight with the FunJet GoPro edition. I was out flying at a field near the lake Vättern. It was late in the afternoon, the wind had died down and it was a perfect evening to fly FPV.

With the 6*4 prop screaming at 22000 RPM, I threw her up into the sky. Even with the GoPro camera mounted it still flies pretty good. After flying a couple of passes visually I threw on the goggles. The video link was nice and crisp. After a couple of minutes of putting the video link to the test, I felt completely comfortable with the setup except for one thing, the pan was reversed. I didn’t want to land to correct it, nor did I want to try and correct it in the air, so I let it be for now. The GoPro has such a wide angle and I don’t often use the pan on the FunJet when flying fast. Little did I know that this would cost me the GoPro camera...


The tree I hit and the “beach” the plane crashed on. The picture is taken the morning after the crash. Read More...

The good guys at All things that fly talk about my Under the bridge and into a tree 2 video at 39 minutes in to episode #140. You can download and listen to the episode here; ATTF #140.mp3

A big thanks to Diggs and Jamie for doing the shows. I always look forward to tuesdays, because that’s ATTF day.

Since the Aiptek Z500+ went and died on me, I decided to modify the FunJet to carry the GoPro Hero HD. One nose shorter, it looks like this:

It may look ugly, but as long as I get some good video with it, I don’t care.
Read more on the project page

A while back I killed my FPV FunJet. It was the first flight with the Aiptek Z500+. After the crash I powered up the camera to makes sure that it still worked. It did boot up and showed me the option to choose between “Earphones” and “TV-out”. -Great! It works, I thought, and laid it a side for the moment to work on the tricopter.

After finishing the FunJet V2 build, it was finally time to get out and do some flying with the Z500+. I drove to the field and set everything up for what was looking to be an awesome flight. The weather was perfect and there was no wind at all. I powered everything up and looked in the goggles, the “Earphones” or “TV-out” screen was showing. So I selected “TV-out” using the remote. This was when I got a feeling like missing a step walking down some stairs... Read More...

I’ve just finished my review of the Flytron DT-3K headtracker.

I’ve tested it extensively and this is the best headtracker I’ve tried so far. Flawless precision, great resolution and very smooth head-tracking without the slightest jerking, stopping or jumps. It’s easy to mount, lightweight and built to last for a hundred years. The PPM-Inject function makes this headtracker work with simple transmitters, as well as advanced ones, so there is no need to buy an expensive transmitter just to be able to use head-tracking any more...
Continue reading on the review page

It was 6:30am, a blue sky and no wind. The park was empty, the ground was covered in a blanket of windflowers and the sun had just broken the horizon. The GoPro Hero HD was hastily mounted with rubber bands. Anything to be able to capture the glorious sunrise in HD.
Here are the results; Under the bridge and into a tree 2



More info about the Tricopter setup can be found here

It’s done! The tricopter V1.5 is operational.

It’s not as pretty as the old one but I hope it makes up for it in the air.


Comparing the old Turnigy 302 gyros to the new HK401B, the HK401B’s are much more sensitive to vibrations. But once you get rid of the vibrations the HK401B’s perform a little better than the 302’s. It feels a more...
Continue reading on the project page

Since the Trunigy 302 gyros doesn’t work well with my Futaba FASST receiver I decided to try using 4 Hobbyking HK401B gyros instead.

But the HK401 gyros have a larger footprint and didn’t fit the original frame, thus the Tricopter V1.5 was born.

Read more about on the project page